• Online Account Log-In
  • Scott Sky Smith Blog – Sky Log
  • Privacy Policy
Scott Sky Smith Insurance

Category Archives: pontoon and deck boat magazine

Honda Marine Unveils Design Concept Engine at Miami International Boat Show 2017

Posted on February 17, 2017 by skysmith
MEDIA ALERT
Honda Marine Unveils Design Concept Engine at Miami International Boat Show 2017
Sleek, Aerodynamic, Powerful and Stylish – Honda Marine Concept Engine Reveals a Bold Future for Honda Marine
Honda Marine breaks the mold for marine engines at the 2017 Miami International Boat Show with a bold concept engine that could power the future of boating. With inspiration from across Honda’s lineup – including automotive, marine and aeronautical – the design concept engine is a blue sky vision for what future marine engines could look like.

Honda Marine keeps the momentum rolling with the debut at the 2017 Miami International Boat Show of a concept engine that could power the future of boating.
·       Sleek, Stylish concept engine – inspired by the Acura NSX American-made Supercar – imagines a bold new engine for the future of what marine engines could be
·       New ‘Destination Honda’ display showcases a new look and lifestyle destination at the 2017 Miami International Boat Show
·       Refreshed Honda Marine BF40 and BF50 engines make their first appearance at a boat show
For complete details, please see the attached news release as well as select images showcasing this new design concept engine.  This release, plus additional hi-resolution photos, are available for download at www.hondanews.comin the Honda Marine section of the site: http://hondanews.com/honda-marine
Should you have any questions or need additional information, please contact us.

Share this:

  • Click to share on Twitter (Opens in new window)
  • Click to share on Facebook (Opens in new window)
  • Click to share on LinkedIn (Opens in new window)
  • Click to share on Tumblr (Opens in new window)
  • Click to share on Pinterest (Opens in new window)
  • Click to share on WhatsApp (Opens in new window)
  • More
  • Click to email a link to a friend (Opens in new window)
Posted in Boat Insurance, boating, engines, Honda, Honda marine, Miami Boat Show, new boats, outboard motors, pontoon and deck boat magazine |

More winterization tips.

Posted on October 29, 2014 by skysmith
Boat lifts and docks. 

Depending on your dock and lift it the winter might not mean anything but removing the slip cover and greasing and checking the cables.  If it is a floating dock it might require removing the dock from the water and storing.  Which ever you do this is the time for a little preventative maintenance.  Preventative maintenance reduces the over all cost of ownership. Repairing before breaking extends the life of the item and reduces the cost of repairs.

Inspect the dock and lift for damage and corrosion.  Lubricate any pulleys and cables with good quality water resistant (marine grade) grease. This is also a good time to spray any cables with a rust and corrosion inhibitor. 
Remove any damaged boards or surface sections and replace.  If you don’t remove and replace at this time, make a list or what’s wrong and what parts you need to order. Order them early so you don’t forget. One good reason to do the repairs now is so that you are not pressured to get the repairs done and the docks back in the water come spring time. No one likes to miss a spring day of boating because you are waiting for parts (boat, dock or lift parts).

Paint or treat any surface material to seal the moisture out. 

Share this:

  • Click to share on Twitter (Opens in new window)
  • Click to share on Facebook (Opens in new window)
  • Click to share on LinkedIn (Opens in new window)
  • Click to share on Tumblr (Opens in new window)
  • Click to share on Pinterest (Opens in new window)
  • Click to share on WhatsApp (Opens in new window)
  • More
  • Click to email a link to a friend (Opens in new window)
Posted in boat checklist, boat docks, Boat Insurance, boat maintenance, corrosion, econolift, hydrohoist, pontoon and deck boat magazine, Ultimate Boat Maintenance Projects, wd40 |

Boat winter checklist

Posted on October 15, 2014 by skysmith
I might have posted this before, but you can never be too careful when putting your boat away for the winter. Even if you live in the warmer climate’s where taking the boat out because of ice isn’t a problem…its still good to do a number of the items regularly. 

Cleaning buildup from the pontoons.
Taking a boat out of service requires the owner to take preventative steps to prevent corrosion and damage to the boats and its systems.  In the Northern states it is often called winterization, but in reality any time the boat is in a “lay-up” situation for a number of months, the owners should take steps to protect their investment.  Most of the following items can be done on the trailer, in the slip on the lift or in a shop. If you have a larger boat that stays in the water you will also want to makes sure that your boat is protected from the lake freezing by using bubblers to prevent ice build up against the hull.
Each boat is different and the options and systems on yours might need additional items serviced.  If you are planning on doing all the work, make sure you have a copy of the boat, engine and systems service manuals.

By following a simple checklist and with a little elbow grease, you can protect your boat during lay-up. If you are uncomfortable doing any of these items, call a professional. 
  1. Add a fuel stabilizer to preserve both the fuel and the fuel tank for the upcoming winter and spring months.
  2. Run the engine, checking the timing and basic operations. This also distributes the fuel stabilizer through out the fuels system.
  3. Remove the boat from the water and inspect the exterior for damage.  Make and repairs or notes to remind you in the spring and give the boat a coat of wax.
  4. You will need to protect the internal passage ways of the engine from freezing. Depending on the type of engine and cooling system you may need to add antifreeze to the cooling system (partial or fully closed cooling systems).  And/or you might need to drain the water from the engine block and manifolds and refill with marine grade non toxic antifreeze.  This can be done using an inexpensive flushing adapter, garden hoses and antifreeze. 
  5. During the time you are flushing and refilling the cooling system, spray sticky “fogging” oil in the carburetor or intake while the engine is running. Fogging oil will stick to the engine internal passage ways giving the inside of the engine a protective coating against corrosion.
    Fogging spray
  6. After you have filled the cooling passages with anti freeze and fogged the engine, shut the engine off and inspect the lower unit. Remove the bottom plug in the lower unit and remove any water that might be mixed with the oil (hopefully there will not be any water or you might need more repairs in the spring).
  7. Inspect the throttle, steering and shift cables for binding and wear
  8. Apply anti corrosion grease to all fittings, linkages and steering cables
  9. Check all the belts, hoses and the general condition of the engine, drive unit and lower unit.
  10. Remove any items from the cabin that might freeze.
  11. Remove and food that would attract rodents and bugs.
  12. Place some type of anti moisture containers (like Damp Rid) through out the cabin to help reduce any moisture build up that could cause mold and mildew over the winter.  Often times it’s a good idea to place the cushions and mattresses on an edge or lifted up with small blocks so there can be airflow over more surface areas. You don’t want to be asleep on a twin mattress thinking it’s comfy when it’s really moldy!
  13. If you have a water system, galley and head, you will need to drain the water and refill the system with non toxic marine grade anti freeze also.
  14. Last, cover the boat to keep out the elements, animals and bugs. Tarps or shrink wrap doesn’t matter.  If it’s too airtight the boat will get large amounts of condensation leading to mold and mildew. Make sure however you cover the boat it is tight but still has air flow.

Share this:

  • Click to share on Twitter (Opens in new window)
  • Click to share on Facebook (Opens in new window)
  • Click to share on LinkedIn (Opens in new window)
  • Click to share on Tumblr (Opens in new window)
  • Click to share on Pinterest (Opens in new window)
  • Click to share on WhatsApp (Opens in new window)
  • More
  • Click to email a link to a friend (Opens in new window)
Posted in Boat Insurance, boat maintenance, boat repair, Boat winterization checklist, boating safety, Encore bentley pontoons, evinrude outboards, Mercury outboards, pontoon and deck boat magazine, pontoon boats |
Next Page »

Contact us

Call – (515) 289-1439

Fax – (515) 864-0334

Email: ins@skysmith.com

 

Wings, Wheels, Water YouTube Channel

subscribeSubscribe to my channel
«
Prev
1
/
7
Next
»
loading
play
Touch 'N Go - Liability
play
Touch 'N Go - Floats
play
Touch 'N Go - Cost (of Aircraft Ownership)
«
Prev
1
/
7
Next
»
loading

Twitter

Tweets by scottskysmith Follow @scottskysmith

Scott Sky Smith Facebook

Scott Sky Smith Facebook
Privacy & Cookies: This site uses cookies. By continuing to use this website, you agree to their use.
To find out more, including how to control cookies, see here: Cookie Policy
  • Sun N Fun
  • Don’t let your aviation insurance lapse!
  • Buying an airplane?
  • Heading to Sun N Fun?
  • Smith Miniplane Plans

CyberChimps WordPress Themes

© Scott Sky Smith